technical data sheet fmc adaptor plug - plug 16S101-S00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to n/a documents n/a material and plating connector parts material plating center contact brass aurodur, gold plated outer contact beryllium copper aurodur, gold plated dielectric ptfe
technical data sheet fmc adaptor plug - plug 16S101-S00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 25 db, dc to 5 ghz ? 22 db, 5 to 10 ghz insertion loss ? 0.1 db x [ghz] f insulation resistance ? 5 x10 3 m ? center contact resistance ? 6 m ? outer contact resistance ? 2 m ? test voltage 500 v rms working voltage 335 v rms contact current 1.2 a dc max. mechanical data mating cycles min. 100 engagement force smooth bore 9 n max. limited detent 45 n max. full detent 68 n max. disengagement force smooth bore 2.2 n min. limited detent 9 n min. full detent 22 n min. environmental data temperature range -40 c to +105 c max. soldering temperature +260 c for 10 sec. rapid change of temperature iec 60169-1 clause 16.4 (-40 c to +105 c) mixed flowing gas din en 60068-2-60 meth. 4 (10 d) vibration iec 61169-1 clause 9.3.3 (10-2000 hz; 15 g) shock iec 60169-1 clause 15.8 (50 g 11 ms half-sine) damp heat iec 60169-1 clause 16.3 (+40 c 56 d) 2002/95/ec (rohs) compliant suitable cables n/a weight weight 0.11 g/pce draft date approved date rev. engineering change number name date andreas fellner 07.07.05 sa. krautenbacher 11.03.14 g00 14-0352 t. krojer 11.03.14 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommenda tion to infringe existing patents. in the effort to improve ou r products, we reserve the right to ma ke changes judged to be necessary.
|